View LM2903AVQDR_9036873.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

lm193, lm293, lm293a lm393, lm393a, lm2903, lm2903v dual differential comparators slcs005w ? june 1976 ? revised july 2010 1 post office box 655303 ? dallas, texas 75265 single supply or dual supplies wide range of supply voltage ? max rating ...2 v to 36 v ? tested to 30 v . . . non-v devices ? tested to 32 v ...v -suffix devices low supply-current drain independent of supply voltage . . . 0.4 ma typ per comparator low input bias current . . . 25 na typ low input offset current ...3 na typ (lm193) low input offset voltage ...2 mv typ common-mode input voltage range includes ground differential input voltage range equal to maximum-rated supply voltage . . . 36 v low output saturation voltage output compatible with ttl, mos, and cmos description/ordering information these devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. operation from dual supplies also is possible as long as the dif ference between the two supplies is 2 v to 36 v, and v cc is at least 1.5 v more positive than the input common-mode voltage. current drain is independent of the supply voltage. the outputs can be connected to other open-collector outputs to achieve wired-and relationships. the lm193 is characterized for operation from ?55 c to 125 c. the lm293 and lm293a are characterized for operation from ?25 c to 85 c. the lm393 and lm393a are characterized for operation from 0 c to 70 c. the lm2903 is characterized for operation from ?40 c to 125 c. copyright ? 2010, texas instruments incorporated production data information is current as of publication date. products conform to specifications per the terms of texas instruments standard warranty. production processing does not necessarily include testing of all parameters. please be aware that an important notice concerning avail ability, standard warranty, and use in critical applications of texas instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. 1 2 3 4 8 7 6 5 1out 1in? 1in+ gnd v cc 2out 2in? 2in+ lm193 ...d or jg p ackage lm293 . . . d, dgk, or p package lm293a ...d or dgk package lm393, lm393a . . . d, dgk, p, ps, or pw package lm2903 . . . d, dgk, p, ps, or pw package (top view) 3212019 910111213 4 5 6 7 8 18 17 16 15 14 nc 2out nc 2in? nc nc 1in? nc 1in+ nc lm193 ... fk p ackage (top view) nc 1out nc 2in+ nc v nc nc gnd nc cc nc ? no internal connection on products compliant to mil-prf-38535, all parameters are tested unless otherwise noted. on all other products, production processing does not necessarily include testing of all parameters.
lm193, lm293, lm293a lm393, lm393a, lm2903, lm2903v dual differential comparators slcs005w ? june 1976 ? revised july 2010 2 post office box 655303 ? dallas, texas 75265 ordering information t a v iomax at 25 c max v cc package orderable part number top-side marking pdip (p) tube of 50 lm393p lm393p tube of 75 lm393d soic (d) reel of 2500 lm393dr lm393 soic (d) reel of 2500 lm393drg3 lm393 5 mv 30 v sop (ps) reel of 2000 lm393psr l393 5 mv 30 v tube of 150 lm393pw tssop (pw) reel of 2000 lm393pwr l393 0 c to 70 c tssop (pw) reel of 2000 lm393pwrg3 l393 0 c to 70 c msop/vssop (dgk) reel of 2500 lm393dgkr m9_ pdip (p) tube of 50 lm393ap lm393ap soic (d) tube of 75 lm393ad lm393a 2mv 30 v soic (d) reel of 2500 lm393adr lm393a 2 mv 30 v sop (ps) reel of 2000 lm393apsr l393a tssop (pw) reel of 2000 lm393apwr l393a msop/vssop (dgk) reel of 2500 lm393adgkr m8_ pdip (p) tube of 50 lm293p lm293p tube of 75 lm293d 5 mv 30 v soic (d) reel of 2500 lm293dr lm293 25 cto85 c 5 mv 30 v soic (d) reel of 2500 lm293drg3 lm293 ?25 c to 85 c msop/vssop (dgk) reel of 2500 lm293dgkr mc_ soic (d) tube of 75 lm293ad lm293a 2 mv 30 v soic (d) reel of 2500 lm293adr lm293a 2 mv 30 v msop/vssop (dgk) reel of 2500 lm293adgkr md_ pdip (p) tube of 50 lm2903p lm2903p tube of 75 lm2903d soic (d) reel of 2500 lm2903dr lm2903 7v 30 v soic (d) reel of 2500 lm2903drg3 lm2903 7 mv 30 v sop (ps) reel of 2000 lm2903psr l2903 40 c to 125 c tssop (pw) reel of 2000 lm2903pwr l2903 ?40 c to 125 c tssop (pw) reel of 2000 lm2903pwrg3 l2903 msop/vssop (dgk) reel of 2500 lm2903dgkr ma_ 7mv 32 v soic (d) reel of 2500 lm2903vqdr l2903v 7 mv 32 v tssop (pw) reel of 2000 lm2903vqpwr l2903v 2mv 32 v soic (d) reel of 2500 LM2903AVQDR l2903av 2 mv 32 v tssop (pw) reel of 2000 lm2903avqpwr l2903av cdip (jg) tube of 50 lm193jg lm193jg ?55 c to 125 c 5 mv 30 v lccc (fk) tube of 55 lm193fk lm193fk soic (d) reel of 2500 lm193dr lm193 ? for the most current package and ordering information, see the package option addendum at the end of this document, or see the ti web site at www.ti.com. ? package drawings, thermal data, and symbolization are available at www.ti.com/packaging. the actual top-side marking has one additional character that designates the wafer fab/assembly site.
lm193, lm293, lm293a lm393, lm393a, lm2903, lm2903v dual differential comparators slcs005w ? june 1976 ? revised july 2010 3 post office box 655303 ? dallas, texas 75265 symbol (each comparator) in+ in? out schematic (each comparator) 80- a current regulator 80 a 60 a 10 a v cc 10 a out gnd in+ in? epi-fet diodes resistors transistors current values shown are nominal. component count 1 2 2 30 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) ? supply voltage, v cc (see note 1) 36 v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . differential input voltage, v id (see note 2) 36 v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . input voltage range, v i (either input) ?0.3 v to 36 v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . output voltage, v o 36 v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . output current, i o 20 ma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . duration of output short-circuit to ground (see note 3) unlimited . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . package thermal impedance, ja (see notes 4 and 5): d package 97 c/w . . . . . . . . . . . . . . . . . . . . . . . . . . . . dgk package 172 c/w . . . . . . . . . . . . . . . . . . . . . . . . p package 85 c/w . . . . . . . . . . . . . . . . . . . . . . . . . . . . ps package 95 c/w . . . . . . . . . . . . . . . . . . . . . . . . . . . pw package 149 c/w . . . . . . . . . . . . . . . . . . . . . . . . . package thermal impedance, jc (see notes 6 and 7): fk package 5.61 c/w . . . . . . . . . . . . . . . . . . . . . . . . . jg package 14.5 c/w . . . . . . . . . . . . . . . . . . . . . . . . . operating virtual junction temperature, t j 150 c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . case temperature for 60 seconds: fk package 260 c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: jg package 300 c . . . . . . . . . . . . . . . . . . . . storage temperature range, t stg ?65 c to 150 c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ? stresses beyond those listed under ?absolute maximum ratings? may cause permanent damage to the device. these are stress ratings only, a nd functional operation of the device at these or any other conditions beyond those indicated under ?recommended operating conditi ons? is not implied. exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. notes: 1. all voltage values, except differential voltages, are with respect to gnd. 2. differential voltages are at in+, with respect to in?. 3. short circuits from outputs to v cc can cause excessive heating and eventual destruction. 4. maximum power dissipation is a function of t j (max), ja , and t a . the maximum allowable power dissipation at any allowable ambient temperature is p d = (t j (max) ? t a )/ ja . operating at the absolute maximum t j of 150 c can affect reliability. 5. the package thermal impedance is calculated in accordance with jesd 51-7. 6. maximum power dissipation is a function of t j (max), jc , and t c . the maximum allowable power dissipation at any allowable case temperature is p d = (t j (max) ? t c )/ jc . operating at the absolute maximum t j of 150 c can affect reliability. 7. the package thermal impedance is calculated in accordance with mil-std-883.
lm193, lm293, lm293a lm393, lm393a, lm2903, lm2903v dual differential comparators slcs005w ? june 1976 ? revised july 2010 4 post office box 655303 ? dallas, texas 75265 electrical characteristics at specified free-air temperature, v cc = 5 v (unless otherwise noted) parameter test conditions t a ? lm193 lm293 lm393 unit parameter test conditions t a ? min typ max min typ max unit v input offset voltage v cc = 5 v to 30 v, v 14v 25 c 2 5 2 5 mv v io input offset voltage v o = 1.4 v, v ic = v ic(min) full range 9 9 mv i input offset current v 14v 25 c 3 25 5 50 na i io input offset current v o = 1.4 v full range 100 250 na i input bias current v 14v 25 c ?25 ?100 ?25 ?250 na i ib input bias current v o = 1.4 v full range ?300 ?400 na v common-mode 25 c 0 to v cc ? 1.5 0 to v cc ? 1.5 v v icr common mode input voltage range ? full range 0 to v cc ? 2 0 to v cc ? 2 v a vd large-signal differential-voltage amplification v cc = 15 v, v o = 1.4 v to 11.4 v, r l 15 k ? to v cc 25 c 50 200 50 200 v/mv i hi g h-level v oh = 5 v, v id = 1 v 25 c 0.1 0.1 50 na i oh high level output current v oh = 30 v, v id = 1 v full range 1 1 a v low-level i 4ma v 1v 25 c 150 400 150 400 mv v ol low level output voltage i ol = 4 ma, v id = ?1 v full range 700 700 mv i ol low-level output current v ol = 1.5 v, v id = ?1 v 25 c 6 6 ma i supply current r = c 0.8 1 0.8 1 ma i cc supply current r l = v cc = 30 v full range 2.5 2.5 ma ? full range (min or max) for lm193 is ?55 c to 125 c, for lm293 is 25 c to 85 c, and for lm393 is 0 c to 70 c. all characteristics are measured with zero common-mode input voltage, unless otherwise specified. ? the voltage at either input or common-mode should not be allowed to go negative by more than 0.3 v. the upper end of the common-mode voltage range is v cc + ? 1.5 v for the inverting input (?), and the non-inverting input (+) can exceed the v cc level; the comparator provides a proper output state. either or both inputs can go to 30 v without damage.
lm193, lm293, lm293a lm393, lm393a, lm2903, lm2903v dual differential comparators slcs005w ? june 1976 ? revised july 2010 5 post office box 655303 ? dallas, texas 75265 electrical characteristics at specified free-air temperature, v cc = 5 v (unless otherwise noted) parameter test conditions t a ? lm293a lm393a unit parameter test conditions t a ? min typ max unit v input offset voltage v cc = 5 v to 30 v, v o = 1.4 v, 25 c 1 2 mv v io input offset voltage v cc = 5 v to 30 v , v o = 1 . 4 v , v ic = v ic(min) full range 4 mv i input offset current v 14v 25 c 5 50 na i io input offset current v o = 1.4 v full range 150 na i input bias current v 14v 25 c ?25 ?250 na i ib input bias current v o = 1.4 v full range ?400 na v common-mode input volta g e 25 c 0 to v cc ? 1.5 v v icr common mode input voltage range full range 0 to v cc ? 2 v a vd large-signal differential-voltage amplification v cc = 15 v, v o = 1.4 v to 11.4 v, r l 15 k ? to v cc 25 c 50 200 v/mv i high level output current v oh = 5 v, v id = 1 v 25 c 0.1 50 na i oh high-level output current v oh = 30 v, v id = 1 v full range 1 a v low level output voltage i 4ma v 1v 25 c 150 400 mv v ol low-level output voltage i ol = 4 ma, v id = ?1 v full range 700 mv i ol low-level output current v ol = 1.5 v, v id = ?1 v 25 c 6 ma i supply current r = c 0.8 1 ma i cc supply current r l = v cc = 30 v full range 2.5 ma ? full range (min or max) for lm293a is 25 c to 85 c, and for lm393a is 0 c to 70 c. all characteristics are measured with zero common-mode input voltage, unless otherwise specified. the voltage at either input or common-mode should not be allowed to go negative by more than 0.3 v. the upper end of the common-mode voltage range is v cc+ ? 1.5 v, but either or both inputs can go to 30 v without damage.
lm193, lm293, lm293a lm393, lm393a, lm2903, lm2903v dual differential comparators slcs005w ? june 1976 ? revised july 2010 6 post office box 655303 ? dallas, texas 75265 electrical characteristics at specified free-air temperature, v cc = 5 v (unless otherwise noted) parameter test conditions t ? lm2903 lm2903a unit parameter test conditions t a ? min typ max min typ max unit v input offset voltage v cc = 5 v to max ? , v 14v 25 c 2 7 1 2 mv v io input offset voltage v o = 1.4 v, v ic = v ic(min) full range 15 4 mv i input offset current v 14v 25 c 5 50 5 50 na i io input offset current v o = 1.4 v full range 200 200 na i input bias current v 14v 25 c ?25 ?250 ?25 ?250 na i ib input bias current v o = 1.4 v full range ?500 ?500 na v common-mode 25 c 0 to v cc ? 1.5 0 to v cc ? 1.5 v v icr common mode input voltage range full range 0 to v cc ? 2 0 to v cc ? 2 v a vd large-signal differential-voltage amplification v cc = 15 v, v o = 1.4 v to 11.4 v, r l 15 k ? to v cc 25 c 25 100 25 100 v/mv i hi g h-level v oh = 5 v, v id = 1 v 25 c 0.1 50 0.1 50 na i oh high level output current v oh = v cc max, v id = 1 v full range 1 1 a v low-level i 4ma v 1v 25 c 150 400 150 400 mv v ol low level output voltage i ol = 4 ma, v id = ?1 v full range 700 700 mv i ol low-level output current v ol = 1.5 v, v id = ?1 v 25 c 6 6 ma i supply current r = c 0.8 1 0.8 1 ma i cc supply current r l = v cc = max full range 2.5 2.5 ma ? full range (min or max) for lm2903 is ?40 c to 125 c. all characteristics are measured with zero common-mode input voltage, unless otherwise specified. ? v cc max = 30 v for non-v devices and 32 v for v-suffix devices. the voltage at either input or common-mode should not be allowed to go negative by more than 0.3 v. the upper end of the common-mode voltage range is v cc+ ? 1.5 v, but either or both inputs can go to 30 v (32 v for v-suffix devices) without damage. switching characteristics, v cc = 5 v, t a = 25 c parameter test conditions lm193 lm293, lm293a lm393, lm393a lm2903 unit typ response time r l connected to 5 v throu g h 5.1 k ? , 100-mv input step with 5-mv overdrive 1.3 s response time r l connected to 5 v through 5 . 1 k ? s ? c l includes probe and jig capacitance. note 8: the response time specified is the interval between the input step function and the instant when the output crosses 1.4 v.
package option addendum www.ti.com 11-apr-2013 addendum-page 1 packaging information orderable device status (1) package type package drawing pins package qty eco plan (2) lead/ball finish msl peak temp (3) op temp (c) top-side markings (4) samples 5962-9452601q2a active lccc fk 20 1 tbd call ti call ti -55 to 125 5962- 9452601q2a lm193fkb 5962-9452601qpa active cdip jg 8 1 tbd call ti call ti -55 to 125 9452601qpa lm193 jm38510/11202bpa active cdip jg 8 1 tbd a42 n / a for pkg type -55 to 125 jm38510 /11202bpa lm193dr active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -55 to 125 lm193 lm193drg4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -55 to 125 lm193 lm193fkb active lccc fk 20 1 tbd post-plate n / a for pkg type -55 to 125 5962- 9452601q2a lm193fkb lm193jg active cdip jg 8 1 tbd a42 n / a for pkg type -55 to 125 lm193jg lm193jgb active cdip jg 8 1 tbd a42 n / a for pkg type -55 to 125 9452601qpa lm193 LM2903AVQDR active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 l2903av LM2903AVQDRg4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 l2903av lm2903avqpwr active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 l2903av lm2903avqpwrg4 active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 l2903av lm2903d active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 lm2903 lm2903de4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 lm2903 lm2903dg4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 lm2903 lm2903dgkr active vssop dgk 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 (map ~ mas ~ mau)
package option addendum www.ti.com 11-apr-2013 addendum-page 2 orderable device status (1) package type package drawing pins package qty eco plan (2) lead/ball finish msl peak temp (3) op temp (c) top-side markings (4) samples lm2903dgkrg4 active vssop dgk 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 (map ~ mas ~ mau) lm2903dr active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 lm2903 lm2903dre4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 lm2903 lm2903drg3 active soic d 8 2500 green (rohs & no sb/br) cu sn level-1-260c-unlim -40 to 125 lm2903 lm2903drg4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 lm2903 lm2903p active pdip p 8 50 pb-free (rohs) cu nipdau n / a for pkg type -40 to 125 lm2903p lm2903pe4 active pdip p 8 50 pb-free (rohs) cu nipdau n / a for pkg type -40 to 125 lm2903p lm2903psr active so ps 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 l2903 lm2903psrg4 active so ps 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 l2903 lm2903pwle obsolete tssop pw 8 tbd call ti call ti -40 to 125 lm2903pwr active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 l2903 lm2903pwre4 active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 l2903 lm2903pwrg3 active tssop pw 8 2000 green (rohs & no sb/br) cu sn level-1-260c-unlim -40 to 125 l2903 lm2903pwrg4 active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 l2903 lm2903qd active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 2903q lm2903qdg4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 2903q lm2903qdr active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 2903q lm2903qdrg4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 2903q lm2903qp obsolete pdip p 8 tbd call ti call ti -40 to 125
package option addendum www.ti.com 11-apr-2013 addendum-page 3 orderable device status (1) package type package drawing pins package qty eco plan (2) lead/ball finish msl peak temp (3) op temp (c) top-side markings (4) samples lm2903vqdr active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 l2903v lm2903vqdrg4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 l2903v lm2903vqpwr active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 l2903v lm2903vqpwrg4 active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 l2903v lm293ad active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -25 to 85 lm293a lm293ade4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -25 to 85 lm293a lm293adg4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -25 to 85 lm293a lm293adgkr active vssop dgk 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -25 to 85 (mdp ~ mds ~ mdu) lm293adgkrg4 active vssop dgk 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -25 to 85 (mdp ~ mds ~ mdu) lm293adr active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -25 to 85 lm293a lm293adre4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -25 to 85 lm293a lm293adrg4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -25 to 85 lm293a lm293d active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -25 to 85 lm293 lm293de4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -25 to 85 lm293 lm293dg4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -25 to 85 lm293 lm293dgkr active vssop dgk 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -25 to 85 (mcp ~ mcs ~ mcu) lm293dgkrg4 active vssop dgk 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -25 to 85 (mcp ~ mcs ~ mcu) lm293dr active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -25 to 85 lm293
package option addendum www.ti.com 11-apr-2013 addendum-page 4 orderable device status (1) package type package drawing pins package qty eco plan (2) lead/ball finish msl peak temp (3) op temp (c) top-side markings (4) samples lm293dre4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -25 to 85 lm293 lm293drg3 active soic d 8 2500 green (rohs & no sb/br) cu sn level-1-260c-unlim -25 to 85 lm293 lm293drg4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -25 to 85 lm293 lm293p active pdip p 8 50 pb-free (rohs) cu nipdau n / a for pkg type -25 to 85 lm293p lm293pe4 active pdip p 8 50 pb-free (rohs) cu nipdau n / a for pkg type -25 to 85 lm293p lm393ad active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 lm393a lm393ade4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 lm393a lm393adg4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 lm393a lm393adgkr active vssop dgk 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 (m8p ~ m8s ~ m8u) lm393adgkrg4 active vssop dgk 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 (m8p ~ m8s ~ m8u) lm393adr active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 lm393a lm393adre4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 lm393a lm393adrg4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 lm393a lm393ap active pdip p 8 50 pb-free (rohs) cu nipdau n / a for pkg type 0 to 70 lm393ap lm393ape4 active pdip p 8 50 pb-free (rohs) cu nipdau n / a for pkg type 0 to 70 lm393ap lm393apsr active so ps 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 l393a lm393apsre4 active so ps 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 l393a lm393apsrg4 active so ps 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 l393a
package option addendum www.ti.com 11-apr-2013 addendum-page 5 orderable device status (1) package type package drawing pins package qty eco plan (2) lead/ball finish msl peak temp (3) op temp (c) top-side markings (4) samples lm393apwle obsolete tssop pw 8 tbd call ti call ti 0 to 70 lm393apwr active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 l393a lm393apwre4 active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 l393a lm393apwrg4 active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 l393a lm393d active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 lm393 lm393de4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 lm393 lm393dg4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 lm393 lm393dgkr active vssop dgk 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 (m9p ~ m9s ~ m9u) lm393dgkrg4 active vssop dgk 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 (m9p ~ m9s ~ m9u) lm393dr active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 lm393 lm393dre4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 lm393 lm393drg3 active soic d 8 2500 green (rohs & no sb/br) cu sn level-1-260c-unlim 0 to 70 lm393 lm393drg4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 lm393 lm393p active pdip p 8 50 pb-free (rohs) cu nipdau n / a for pkg type 0 to 70 lm393p lm393pe3 active pdip p 8 50 pb-free (rohs) cu sn n / a for pkg type 0 to 70 lm393p lm393pe4 active pdip p 8 50 pb-free (rohs) cu nipdau n / a for pkg type 0 to 70 lm393p lm393psle obsolete so ps 8 tbd call ti call ti 0 to 70 lm393psr active so ps 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 l393 lm393psrg4 active so ps 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 l393
package option addendum www.ti.com 11-apr-2013 addendum-page 6 orderable device status (1) package type package drawing pins package qty eco plan (2) lead/ball finish msl peak temp (3) op temp (c) top-side markings (4) samples lm393pw active tssop pw 8 150 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 l393 lm393pwe4 active tssop pw 8 150 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 l393 lm393pwg4 active tssop pw 8 150 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 l393 lm393pwle obsolete tssop pw 8 tbd call ti call ti 0 to 70 lm393pwr active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 l393 lm393pwre4 active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 l393 lm393pwrg3 active tssop pw 8 2000 green (rohs & no sb/br) cu sn level-1-260c-unlim 0 to 70 l393 lm393pwrg4 active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim 0 to 70 l393 m38510/11202bpa active cdip jg 8 1 tbd a42 n / a for pkg type -55 to 125 jm38510 /11202bpa (1) the marketing status values are defined as follows: active: product device recommended for new designs. lifebuy: ti has announced that the device will be discontinued, and a lifetime-buy period is in effect. nrnd: not recommended for new designs. device is in production to support existing customers, but ti does not recommend using this part in a new design. preview: device has been announced but is not in production. samples may or may not be available. obsolete: ti has discontinued the production of the device. (2) eco plan - the planned eco-friendly classification: pb-free (rohs), pb-free (rohs exempt), or green (rohs & no sb/br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. tbd: the pb-free/green conversion plan has not been defined. pb-free (rohs): ti's terms "lead-free" or "pb-free" mean semiconductor products that are compatible with the current rohs requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. where designed to be soldered at high temperatures, ti pb-free products are suitable for use in specified lead-free processes. pb-free (rohs exempt): this component has a rohs exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. the component is otherwise considered pb-free (rohs compatible) as defined above. green (rohs & no sb/br): ti defines "green" to mean pb-free (rohs compatible), and free of bromine (br) and antimony (sb) based flame retardants (br or sb do not exceed 0.1% by weight in homogeneous material) (3) msl, peak temp. -- the moisture sensitivity level rating according to the jedec industry standard classifications, and peak solder temperature.
package option addendum www.ti.com 11-apr-2013 addendum-page 7 (4) multiple top-side markings will be inside parentheses. only one top-side marking contained in parentheses and separated by a "~" will appear on a device. if a line is indented then it is a continuation of the previous line and the two combined represent the entire top-side marking for that device. important information and disclaimer: the information provided on this page represents ti's knowledge and belief as of the date that it is provided. ti bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. efforts are underway to better integrate information from third parties. ti has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. ti and ti suppliers consider certain information to be proprietary, and thus cas numbers and other limited information may not be available for release. in no event shall ti's liability arising out of such information exceed the total purchase price of the ti part(s) at issue in this document sold by ti to customer on an annual basis. other qualified versions of lm2903, lm293 : ? automotive: lm2903-q1 ? enhanced product: lm293-ep note: qualified version definitions: ? automotive - q100 devices qualified for high-reliability automotive applications targeting zero defects ? enhanced product - supports defense, aerospace and medical applications
tape and reel information *all dimensions are nominal device package type package drawing pins spq reel diameter (mm) reel width w1 (mm) a0 (mm) b0 (mm) k0 (mm) p1 (mm) w (mm) pin1 quadrant lm193dr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 lm2903dgkr vssop dgk 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 q1 lm2903dr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 lm2903dr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 lm2903drg4 soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 lm2903drg4 soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 lm2903psr so ps 8 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 q1 lm2903pwr tssop pw 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 q1 lm2903pwrg3 tssop pw 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 q1 lm2903qdr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 lm2903qdrg4 soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 lm2903vqpwrg4 tssop pw 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 q1 lm293adgkr vssop dgk 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 q1 lm293adr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 lm293adr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 lm293adrg4 soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 lm293adrg4 soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 lm293dgkr vssop dgk 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 q1 package materials information www.ti.com 14-mar-2013 pack materials-page 1
device package type package drawing pins spq reel diameter (mm) reel width w1 (mm) a0 (mm) b0 (mm) k0 (mm) p1 (mm) w (mm) pin1 quadrant lm293dr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 lm293dr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 lm293drg4 soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 lm293drg4 soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 lm393adgkr vssop dgk 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 q1 lm393adr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 lm393adr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 lm393adrg4 soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 lm393adrg4 soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 lm393apsr so ps 8 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 q1 lm393apwr tssop pw 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 q1 lm393dgkr vssop dgk 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 q1 lm393dr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 lm393dr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 lm393drg4 soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 lm393drg4 soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 lm393psr so ps 8 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 q1 lm393pwr tssop pw 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 q1 lm393pwrg3 tssop pw 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 q1 package materials information www.ti.com 14-mar-2013 pack materials-page 2
*all dimensions are nominal device package type package drawing pins spq length (mm) width (mm) height (mm) lm193dr soic d 8 2500 367.0 367.0 35.0 lm2903dgkr vssop dgk 8 2500 364.0 364.0 27.0 lm2903dr soic d 8 2500 367.0 367.0 35.0 lm2903dr soic d 8 2500 340.5 338.1 20.6 lm2903drg4 soic d 8 2500 340.5 338.1 20.6 lm2903drg4 soic d 8 2500 367.0 367.0 35.0 lm2903psr so ps 8 2000 367.0 367.0 38.0 lm2903pwr tssop pw 8 2000 364.0 364.0 27.0 lm2903pwrg3 tssop pw 8 2000 364.0 364.0 27.0 lm2903qdr soic d 8 2500 367.0 367.0 35.0 lm2903qdrg4 soic d 8 2500 367.0 367.0 35.0 lm2903vqpwrg4 tssop pw 8 2000 367.0 367.0 35.0 lm293adgkr vssop dgk 8 2500 364.0 364.0 27.0 lm293adr soic d 8 2500 340.5 338.1 20.6 lm293adr soic d 8 2500 367.0 367.0 35.0 lm293adrg4 soic d 8 2500 340.5 338.1 20.6 lm293adrg4 soic d 8 2500 367.0 367.0 35.0 lm293dgkr vssop dgk 8 2500 364.0 364.0 27.0 lm293dr soic d 8 2500 340.5 338.1 20.6 lm293dr soic d 8 2500 367.0 367.0 35.0 lm293drg4 soic d 8 2500 367.0 367.0 35.0 lm293drg4 soic d 8 2500 340.5 338.1 20.6 lm393adgkr vssop dgk 8 2500 364.0 364.0 27.0 lm393adr soic d 8 2500 340.5 338.1 20.6 lm393adr soic d 8 2500 367.0 367.0 35.0 lm393adrg4 soic d 8 2500 340.5 338.1 20.6 lm393adrg4 soic d 8 2500 367.0 367.0 35.0 lm393apsr so ps 8 2000 367.0 367.0 38.0 lm393apwr tssop pw 8 2000 364.0 364.0 27.0 lm393dgkr vssop dgk 8 2500 364.0 364.0 27.0 lm393dr soic d 8 2500 340.5 338.1 20.6 lm393dr soic d 8 2500 367.0 367.0 35.0 lm393drg4 soic d 8 2500 340.5 338.1 20.6 lm393drg4 soic d 8 2500 367.0 367.0 35.0 lm393psr so ps 8 2000 367.0 367.0 38.0 lm393pwr tssop pw 8 2000 364.0 364.0 27.0 lm393pwrg3 tssop pw 8 2000 364.0 364.0 27.0 package materials information www.ti.com 14-mar-2013 pack materials-page 3
mechanical data mcer001a january 1995 revised january 1997 post office box 655303 ? dallas, texas 75265 jg (r-gdip-t8) ceramic dual-in-line 0.310 (7,87) 0.290 (7,37) 0.014 (0,36) 0.008 (0,20) seating plane 4040107/c 08/96 5 4 0.065 (1,65) 0.045 (1,14) 8 1 0.020 (0,51) min 0.400 (10,16) 0.355 (9,00) 0.015 (0,38) 0.023 (0,58) 0.063 (1,60) 0.015 (0,38) 0.200 (5,08) max 0.130 (3,30) min 0.245 (6,22) 0.280 (7,11) 0.100 (2,54) 0 15 notes: a. all linear dimensions are in inches (millimeters). b. this drawing is subject to change without notice. c. this package can be hermetically sealed with a ceramic lid using glass frit. d. index point is provided on cap for terminal identification. e. falls within mil std 1835 gdip1-t8

important notice texas instruments incorporated and its subsidiaries (ti) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per jesd46, latest issue, and to discontinue any product or service per jesd48, latest issue. buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. all semiconductor products (also referred to herein as ? components ? ) are sold subject to ti ? s terms and conditions of sale supplied at the time of order acknowledgment. ti warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in ti ? s terms and conditions of sale of semiconductor products. testing and other quality control techniques are used to the extent ti deems necessary to support this warranty. except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. ti assumes no liability for applications assistance or the design of buyers ? products. buyers are responsible for their products and applications using ti components. to minimize the risks associated with buyers ? products and applications, buyers should provide adequate design and operating safeguards. ti does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which ti components or services are used. information published by ti regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from ti under the patents or other intellectual property of ti. reproduction of significant portions of ti information in ti data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. ti is not responsible or liable for such altered documentation. information of third parties may be subject to additional restrictions. resale of ti components or services with statements different from or beyond the parameters stated by ti for that component or service voids all express and any implied warranties for the associated ti component or service and is an unfair and deceptive business practice. ti is not responsible or liable for any such statements. buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of ti components in its applications, notwithstanding any applications-related information or support that may be provided by ti. buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. buyer will fully indemnify ti and its representatives against any damages arising out of the use of any ti components in safety-critical applications. in some cases, ti components may be promoted specifically to facilitate safety-related applications. with such components, ti ? s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. nonetheless, such components are subject to these terms. no ti components are authorized for use in fda class iii (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. only those ti components which ti has specifically designated as military grade or ? enhanced plastic ? are designed and intended for use in military/aerospace applications or environments. buyer acknowledges and agrees that any military or aerospace use of ti components which have not been so designated is solely at the buyer ' s risk, and that buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. ti has specifically designated certain components as meeting iso/ts16949 requirements, mainly for automotive use. in any case of use of non-designated products, ti will not be responsible for any failure to meet iso/ts16949. products applications audio www.ti.com/audio automotive and transportation www.ti.com/automotive amplifiers amplifier.ti.com communications and telecom www.ti.com/communications data converters dataconverter.ti.com computers and peripherals www.ti.com/computers dlp ? products www.dlp.com consumer electronics www.ti.com/consumer-apps dsp dsp.ti.com energy and lighting www.ti.com/energy clocks and timers www.ti.com/clocks industrial www.ti.com/industrial interface interface.ti.com medical www.ti.com/medical logic logic.ti.com security www.ti.com/security power mgmt power.ti.com space, avionics and defense www.ti.com/space-avionics-defense microcontrollers microcontroller.ti.com video and imaging www.ti.com/video rfid www.ti-rfid.com omap applications processors www.ti.com/omap ti e2e community e2e.ti.com wireless connectivity www.ti.com/wirelessconnectivity mailing address: texas instruments, post office box 655303, dallas, texas 75265 copyright ? 2013, texas instruments incorporated

▲Up To Search▲

Price & Availability of LM2903AVQDR

	To Download LM2903AVQDR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .